VOOPOO Drag X3 80W Pod Kit

AED 130.00

An 80W pod mod on a removable 21700 or 18650 cell, so you can carry a charged spare instead of waiting to charge. A 1.66 inch touchscreen wakes when you pick it up and replaces the buttons entirely. 5ml side-fill PnP X cartridge with two coils included. Battery sold separately. Delivered in 2 hours across Dubai and within 24 hours across the UAE.

WhatsApp us
Free delivery on orders of 400 AED or more. Get home delivery within 2 hours in Dubai and within 24 hours all over UAE.
SKU: VOOPOO-DRAGX3 Category: Brand:
Description

VOOPOO Drag X3 80W Pod Kit

You will need to buy a battery separately. This device runs on a single removable 21700 or 18650 cell, and none is included. Read the battery section below before ordering.

With that said, this is one of the better pod mods made, and the removable battery is the reason.

Why a removable battery matters

Every other device we stock has the cell sealed inside. When it runs out you stop and charge. When the cell degrades after a couple of years, the device is finished.

The Drag X3 takes a 21700 you can swap in seconds. Carry a charged spare and you never wait. When a cell ages, buy another for a fraction of a new device.

The battery compartment slides open rather than using a hinged door, which reviewers have called the best implementation on any device in this class.

21700 or 18650?

A 21700 gives more capacity and more headroom at 80W. This is what the device is designed around.

An 18650 is smaller and lighter, and an adapter sleeve is included in the box so you can use one.

Both are standard, widely available cells. Buy from a reputable source, buy a genuine brand, and never use a cell with a damaged wrap.

A touchscreen that replaced the buttons

The 1.66 inch colour touchscreen handles everything. There are no adjustment buttons because there is no need for them.

It also has a motion and skin-detect sensor, so picking the device up wakes the screen. In practice that means you glance at it and the information is already there.

One honest note from reviewers: the screen sleeps quite eagerly. Some people find that a minor annoyance, others like the battery saving.

80W and the full PnP X range

Coil Draw Wattage
1.0Ω Tight MTL 11 to 13W
0.8Ω MTL 13 to 16W
0.3Ω RDL 30 to 40W
0.15Ω Full DTL 60 to 80W

A 0.15Ω coil comes pre-installed and a 0.3Ω is included spare, so the kit is set up for direct lung out of the box. Buy a 0.8Ω or 1.0Ω if you want MTL on salt nicotine.

PnP X coils last around 100ml each, well above the 20 to 30ml typical of pod systems.

Shares coils with the Drag S3 and Drag 6

All three run the PnP X platform. If you own more than one, the coils are interchangeable.

5ml side fill, top airflow

Five millilitres is generous. Filling is from the side without removing the cartridge, and the airflow sits on top, which helps against leaking.

VOOPOO recommends 50% to 70% VG liquid. Use 70/30 freebase at 3mg for the 0.15Ω coil, and 50/50 salt nicotine for the higher resistances.

Seven finishes

Spray Black, Gray Metal, Sky Blue, Moss Green, Aurora Purple, Glow Pink and Champagne Golden. Zinc alloy with leather at around 130g.

Drag X3 or Drag S3?

Both are 130 AED here.

The Drag S3 has a 3000mAh battery built in, so it works the moment it arrives. It tops out at 60W with a smaller 0.96 inch screen and physical buttons.

The Drag X3 reaches 80W, has the large touchscreen, and takes a removable cell you can swap or replace. But you must buy that cell, and the device is useless until you do.

If you want to open the box and vape, take the S3. If you want more power, a better screen and a device that outlives its battery, take the X3 and buy a 21700 alongside it.

Specifications

  • Device type: pod mod system
  • Output: 5W to 80W
  • Chipset: GENE.TT 2.0
  • Battery: one 18650 or one 21700, external, not included
  • 18650 adapter sleeve: included
  • Charging: USB Type-C, 5V/2A
  • Voltage range: 3.2V to 4.2V
  • Display: 1.66 inch TFT touchscreen with motion sensor
  • Modes: SMART, RBA, ECO
  • Resistance range: 0.1Ω to 3.0Ω
  • Pod type: PnP X cartridge
  • Pod capacity: 5ml standard, 2ml TPD
  • Filling: side filling
  • Airflow: adjustable top airflow
  • Compatible coils: PnP X series, 0.15Ω to 1.0Ω
  • Included coils: 0.15Ω preinstalled and 0.3Ω spare
  • Recommended e-liquid: 50% to 70% VG
  • Vaping style: MTL, RDL and DTL
  • Unlock: capacitive touch and button
  • Drip tip: removable 810
  • Material: zinc alloy and leather
  • Dimensions: 133 x 34 x 28mm
  • Weight: approximately 130g

How to use

Insert a charged 21700, or fit the adapter sleeve and use an 18650. Mind the polarity markings inside the compartment.

Fill the cartridge from the side, leaving a small air gap, and let the coil saturate for fifteen minutes before your first puff. At 0.15Ω a dry coil burns immediately.

Pick the device up to wake the screen, then set wattage by touch. Adjust the top airflow to taste.

Battery safety: use only genuine cells from a reputable seller. Never use a battery with a torn or damaged wrap. Do not carry loose cells in a pocket with keys or coins.

Buy the VOOPOO Drag X3 in Dubai and across the UAE with fast delivery from Star Vape.

Warning: For use with nicotine-containing e-liquid. Nicotine is an addictive chemical. Sale restricted to adults of legal age. Not for non-smokers, pregnant or breastfeeding women, or anyone with a heart condition.

Additional information
Weight0.28 kg
Dimensions15 × 8 × 5 cm
ColourSpray Black, Gray Metal, Sky Blue, Moss Green, Aurora Purple, Glow Pink, Champagne Golden
Device TypePod Mod System
Maximum Output80W
Output Range5W to 80W
ChipsetGENE.TT 2.0
Battery1 x 18650 or 1 x 21700 External Battery
Battery IncludedNo, sold separately
Adapter Sleeve18650 adapter included
ChargingUSB Type-C, 5V/2A
Voltage Range3.2V to 4.2V
Display1.66 inch TFT Touchscreen with Motion Sensor
Vaping ModesSMART, RBA, ECO
Resistance Range0.1 ohm to 3.0 ohm
Pod TypePnP X Cartridge
Pod Capacity5ml Standard / 2ml TPD
Filling SystemSide Filling
AirflowAdjustable Top Airflow
Compatible CoilsPnP X Series, 0.15 ohm to 1.0 ohm
Included Coils0.15 ohm preinstalled, 0.3 ohm spare
Vaping StyleMTL, RDL and DTL
Unlock SystemCapacitive Touch and Button Unlock
Drip TipRemovable 810 Drip Tip
MaterialZinc Alloy and Leather
Device Dimensions133 x 34 x 28mm
WeightApproximately 130g
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “VOOPOO Drag X3 80W Pod Kit”

Your email address will not be published. Required fields are marked *

About brand
VOOPOO makes powerful kits for both MTL and DTL vaping. Choose the compact Argus G4 pod kit, the Drag S3 or Drag X3 pod mods, or the 220W Drag 6 if you want big clouds.

YOU MAY ALSO LIKE…

RELATED PRODUCTS