OXVA VPrime Pod System

OXVA VPrime Pod System

The VPrime does something no other pod kit does: auto-draw direct-to-lung. Every DTL device before this needed a button. The VPrime fires on inhale at 60 watts, which is the kind of power normally reserved for box mods with a fire button and a menu.

If you want clouds without carrying a mod, this is the device that finally does it.

Choose your colour above.

Colour options

Four carbon and IML finishes, four leather. The leather versions grip better in hand, which matters on a device this size.

60W from a 2600mAh battery

The biggest battery in our pod range by a wide margin, and it needs to be. Running at 45-60W on a sub-ohm pod drains power far faster than an MTL device would. Charging is USB Type-C at 2A.

Auto-draw or button fire

Use it either way. Auto-draw is the headline feature and works reliably even at full power. If you prefer the control of a button, that is there too.

0.96 inch colour screen with three themes

Shows battery, wattage and puff count. Three display themes to pick from, which is a small thing but it makes the device feel less generic than most.

Pods for every style

This is what makes the VPrime versatile rather than just powerful:

One device, four vaping styles, just by swapping the pod. The 0.2Ω comes pre-installed and the 0.6Ω is in the box.

5ml pods with UNITECH 2.0

Cotton fibres wrapped around a mesh coil for fast absorption and even heating. Five millilitres is a large capacity, which you will want at DTL wattages since sub-ohm vaping gets through liquid quickly. Top and side fill, magnetically secured, with five-layer leak protection. A 2ml version exists for regulated markets.

A note on e-liquid

At DTL wattages, use high-VG liquid, ideally 70VG/30PG or higher. Standard 50/50 nic salts will not perform well on the 0.2Ω pod and may spit. If you want to use 50/50 salts, fit the 0.6Ω or 0.8Ω pod and vape at lower wattage.

Specifications

• Battery: 2600mAh built-in
• Output: 5–60W
• Charging: USB Type-C, 5V/2A
• Display: 0.96″ colour screen, three themes
• Activation: auto draw or button fire
• Pod capacity: 5ml (2ml regulated markets)
• Refill: top and side fill
• Pod resistances: 0.2Ω / 0.4Ω / 0.6Ω / 0.8Ω
• Resistance range: 0.1–3.0Ω
• Airflow: adjustable side control
• Technology: OXVA UNITECH 2.0
• Material: zinc alloy with IML or leather
• Dimensions: 105.5 × 37.8 × 23.45mm
• Weight: 116g
• Vaping styles: DTL, RDL, MTL

In the box

• VPrime device
• 0.2Ω pod, pre-installed
• 0.6Ω pod
• USB Type-C cable
• Instruction manual

How to use

1. Charge fully before first use.
2. Remove the protective sticker from the base of the pre-installed pod.
3. Fill the pod, leaving a small air gap.
4. Let the coil soak for ten minutes before your first puff. At sub-ohm resistance a dry coil burns immediately.
5. Set wattage to match the pod, or let smart output handle it.
6. Adjust the side airflow, then inhale.

Which OXVA should you buy?

The Xlim and NeXLIM models are MTL and RDL devices at 30 to 40 watts, built for salt nicotine and everyday use. The VPrime is the only DTL device in the range, running to 60 watts on high-VG liquid for real vapour production. Different purpose entirely.

If you want a discreet device for salt nic, buy an Xlim. If you want clouds, buy this.

Buy the OXVA VPrime in Dubai and across the UAE with fast delivery from Star Vape.

Warning: For use with nicotine-containing e-liquid. Nicotine is an addictive chemical. Sale restricted to adults of legal age. Not for non-smokers, pregnant or breastfeeding women, or anyone with a heart condition.